5.2.3 SBC Tracing

•
Enable Continuous Tracing on OSB/SBC - Activate/deactivate Continuous Tracing for OpenScape Branch (OSB) and OpenScape Session Board Controller (SBC).
•
File Size Threshold [Kbytes] - The log/trace files are sent to OS-TM server when one of the following conditions occurs:
–
The file size reaches the File size threshold (valid values are between 1 and 1024kb)
–
The Time interval threshold is elapsed (valid values are between 1 and 60 min)
The polling time is about 10 seconds so file sizes may vary if the amount of log data is increasing too fast.
NOTE: Default value is 1024 Kbytes.
•
Time Interval Threshold [Minutes] - The log/trace files are sent to OS-TM server when one of the following conditions occurs:
–
The file size reaches the File size threshold (valid values are between 1 and 1024kb)
–
The Time interval threshold is elapsed (valid values are between 1 and 60 min)
The polling time is about 10 seconds so file sizes may vary if the amount of log data is increasing too fast.
NOTE: Default value is 5 minutes.
•
SIP/Q931 Traces - Use this flag to enable the SIP/Q931 trace capture.
•
MGCP Traces - Use this flag to enable the MGCP trace capture.
OpenScape Solution Set V10, Customer Data Collection with WebCDC V1, Planning Guide, Issue 2, ID: A31003-S11A0-P100-2-76A9
 © 07/2024 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.