•
|
OpenScape Branch Endpoint Name (*) - A PSTN gateway or proxy name to be used in the specific branch office indicated under the Endpoints tab.
|
•
|
Trunk Group Name (*) - User assigned named for the port’s trunk group.To configure multiple trunk groups for an OSB, insert multiple rows using the same OSB endpoint name.
|
•
|
Trunk Type (*) - Usage of the trunk. Emergency Trunk is used for routing the Emergency traffic only. Normal Trunks are used to route all the normal traffic.
Important: This field is mandatory for OSEE deployments. |
•
|
PSTN Switch Interface Protocol - Set the PSTN switch interface protocol for the PRI OSBs. Select one of the T1 switch types for US sites or one of the E1 switch types for non US sites. You may configure different switch interface protocols for each trunk group of the PRI OSBs.
|
•
|
T1 CAS Signaling - Set the CAS Line Signaling type. Set this only for OSBs with PRIs that support T1 CAS.
|
•
|
Default Dest - The value must be in the DID range. If empty, the Default Home DN of the endpoint is used.
|