|
•
|
Analog Adapter Name (*) - This name is used as hostname of the analog device.
|
|
•
|
Site Name (*) - A drop down list of the sites as found in the Site tab.
|
|
•
|
Analog Adapter Type (*) - Select which analog adapter from the drop down below.
For the LP devices (for the long lines) the normal Mediatrix devices can be used, as there is no difference for WebCDC concerning the configuration. |
|
•
|
Analog Adapter Signaling Type (DHCP or Static) - There are two available options, Static and DHCP (Dynamic).
|
|
•
|
Analog Adapter Signaling IP Address (*) - Important Note: This field is mandatory only if “Static or DHCP” is set to Static!
|
|
•
|
Analog Adapter Signaling Netmask (*) - Important Note: This field is mandatory only if “Static or DHCP” is set to Static!
|
|
•
|
Analog Adapter Signaling Default GW (*) - Important Note: This field is mandatory only if “Static or DHCP” is set to Static!
|
|
•
|
Serial Number - The serial number of the installed hardware unit.
NOTE: This field is not used during WebCDC Config Files generation. It is only used for tracking purposes of the current project's analog adapters hardware units. |