4.3.5 SBC THIG

This data block is only displayed for OSEE V9 projects and is used to set up the IP addresses, netmask and default gateways IP addresses for the SBC THIG (Topology Hiding Interworking Gateway).
•
Redundancy - The SBC THIG redundancy deployment. Single or Redundant. Default value is Single.
Note: If the OpenScape Voice Type field is set to "Duplex" in the General tab, this field is set to "Redundant" by default and cannot be changed.
•
WAN interface Management IP address 1 - The WAN interface management IP address of SBC node 1.
•
WAN interface Management IP address 2 - The WAN interface management IP address of SBC node 2.
Note: This field is only displayed if the Redundancy field is set to "Redundant"
•
WAN interface Management Virtual IP address - This field is only displayed if the Redundancy field is set to "Redundant".
•
WAN interface Signaling IP address 1 - The WAN interface signaling IP address of SBC node1.
•
WAN interface Signaling IP address 2 - The WAN interface signaling IP address of SBC node2.
Note: This field is only displayed if the Redundancy field is set to "Redundant"
•
WAN interface Signaling Virtual IP address - This field is only displayed if the Redundancy field is set to "Redundant"
•
WAN network Netmask
•
WAN network Default GW
OpenScape Solution Set V10, Customer Data Collection with WebCDC V1, Planning Guide, Issue 2, ID: A31003-S11A0-P100-2-76A9
 © 07/2024 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.