4.3.4.3 Details (OSEE V10)

•

Subnet Sharing (*) - Select the sharing of the following Subnets:

•

Administration (Mgmt)

•

Signaling

•

Billing

IMPORTANT: For OSEE V10 installations, this field is non-editable by the user (greyed-out) and set to 'Mgmt-Billing-Signaling-Shared'!

•

Share Admin and Cluster Interface (*) - This field is only applicable to Standard Duplex OSV scenarios (field "OpenScape Voice Type" set to "Standard Duplex" in tab 'General').

IMPORTANT: For OSEE V10 installations, this field is non-editable by the user (greyed-out) and set to 'yes'!

•

Cluster Name (*) - Cluster Name is used in logicalBranchOfficeId of the OpenBranch Proxy/CSBC xml file so that OpenBranch Assistant can communicate with these modules. For a Central Deployment of Licenses, License Server(s) field should contain the IP Address of CMP.

Changing the Cluster Name in NCPE will result to a non compatible logicalBranchOfficeId provisioned in OpenBranch Modules.Though this can be changed manually from the OpenBranch Advanced tabs or from the OpenBranch local GUI.

•

Proxy logicalBranchOfficeId format:

•

CSBC logicalBranchOfficeId format:

•

Cluster Name Limitations:

•

Maximum 20 Digits Long

•

First Character must be alphabetical

•

Only Alphanumeric and "underscore" characters are allowed

•

Only lowercase characters should be used for consistency

The next section located after the 'Network for OpenScape Voice' section allows the user to configure the subnet IP addresses (Network ID), Netmask, and Default Gateway settings which are then used for the OSV's node.cfg configuration file. These network settings are grouped into settings for Node1 and Node2 (in case of Standard Duplex OSV).

NOTE: A second block of data (identical to the above) will be displayed for Node 2 when OpenScape Voice Type is set to Standard Duplex.

•

Node Hostname (*) - Configures the hostname of the OSV Server node to the entered name.

•

OpenScape Voice IP (Management/Signaling) (*) - Configures the hostname of the OSV Server node to the entered name.

IMPORTANT: This field is mandatory for OSEE V10 installations.

NOTE: The above field is only visible for Integrated Simplex OSV scenarios (field OpenScape Voice Type" set to Integrated Simplex in tab General).

•

OpenScape Voice administration IP (Management) (*) - The OpenScape Voice Management IP is the physical IP of the OSV server.

IMPORTANT: This field is mandatory for OSEE V10 installations.

NOTE: The above field is only visible for Standard Duplex OSV scenarios (field OpenScape Voice Type set to Standard Duplex in tab General).

•

OpenScape Voice signaling managers IP (SIPSM) (*) - The SIPSM IP address is the IP address of the OpenScape Voice where the SIP messages are sent (e.g. REGISTER).

IMPORTANT: This field is mandatory for OSEE V10 installations.

NOTE: The above field is only visible for Standard Duplex OSV scenarios (field OpenScape Voice Type set to Standard Duplex in tab General).

•

OpenScape Voice Network ID (*) -

IMPORTANT: This field is mandatory for OSEE V10 installations!

•

OpenScape Voice Netmask (*) -

IMPORTANT: This field is mandatory for OSEE V10 installations!

•

OpenScape Voice Default Gateway (*) -

IMPORTANT: This field is mandatory for OSEE V10 installations!

•

OpenScape Voice signaling FQDN name (SIPSM) - SIP signaling manager FQDN. The value must be part of the OSV domain i.e. osv.<Domain Name>.

This value is automatically generated when left empty.

NOTE: Both FQDN and DNS SRV entries should be filled if Enable FQDN support on OSV on the General tab is set to yes.

NOTE: The above field is only visible when field Enable FQDN support on OSV in tab General is set to yes.

•

OpenScape Voice signaling DNS SRV name (SIPSM) - SIP signaling manager DNS SRV. The value must be part of the OSV domain i.e. osv.<Domain Name>.

This value is automatically generated when left empty.

NOTE: Both FQDN and DNS SRV entries should be filled if "Enable FQDN support on OSV" on the General tab is set to 'yes'.

NOTE: The above field is only visible when field "Enable FQDN support on OSV" in tab 'General' is set to "yes".

•

OpenScape Voice MTLS FQDN name (SIPSM) - SIP MTLS signaling manager FQDN. The value must be part of the OSV domain i.e. osv.<Domain Name>.

This value is automatically generated when left empty.

NOTE: Both FQDN and DNS SRV entries should be filled if "Enable FQDN support on OSV" on the General tab is set to 'yes'.

NOTE: The above field is only visible when field "Enable FQDN support on OSV" in tab 'General' is set to "yes".

•

OpenScape Voice MTLS DNS SRV name (SIPSM) - SIP MTLS signaling manager DNS SRV. The value must be part of the OSV domain i.e. osv.<Domain Name>.

This value is automatically generated when left empty.

NOTE: Both FQDN and DNS SRV entries should be filled if "Enable FQDN support on OSV" on the General tab is set to 'yes'.

NOTE: The above field is only visible when field "Enable FQDN support on OSV" in tab 'General' is set to "yes".

OpenScape Solution Set V10, Customer Data Collection with WebCDC V1, Planning Guide, Issue 2, ID: A31003-S11A0-P100-2-76A9

© 07/2024 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.