4.3.1 Subnet Information (Standard Solution/vApp)

•
Subnet -
–
Insert an IP address to auto fill all the OSV-required subnets.
–
This data is optional and if entered the following format should be used (subnet network id)/(subnet prefix or subnet net-mask)
e.g 192.168.1.0/24, 172.16.0.0/255.255.255.0
–
User must define a subnet to support at least of 16 IP addresses.
–
If the related button is used without any input in the cells, IP: 192.168.1.0 (and 192.168.2.0 in case of L3 separation) will be used.
–
If the IP address is entered without a Netmask, then WebCDC will automatically add /24 after the IP.
•
Subnet Default Gateway - Default gateway subnet must be in the range of the subnet data provided. If no data is entered, the first IP in the subnet is used.
•
Starting IP - Starting IP must be in the range of the subnet data provided.If entered all the IPs for the main data center shall be calculated based on this offset.
OpenScape Solution Set V10, Customer Data Collection with WebCDC V1, Planning Guide, Issue 2, ID: A31003-S11A0-P100-2-76A9
 © 07/2024 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.