13 OpenScape Xpressions Configuration File

13.1 How to configure Xpressions Server

WebCDC generates the XprConfigFile.xml file which can be used to configure the Xpressions server for correct voicemail service.
•
If there is no configuration script for the FI APL, add the configuration script to the FI APL on the Xpressions Server and configure it by executing the following steps:
1.
Open the XPR monitor and log on with an administrator account.
2.
Click on FI APL settings in the XPR monitor's modules window.
The FI APL configuration dialog opens.
3.
Switch to the Protocols tab.
4.
Select Add and add the XprConfig.e script.
The XprConfig.e script in now displayed on the Protocols tab.
5.
Mark the XprConfig.e script on the Protocols tab and click on Properties.
6.
Fill in the Poll directory field the directory in which FI APL will search for new configuration files.
7.
Specify in the Poll rate field the intervals in which the FI APL will search for new configuration files.
–
Setting 0 (INFINITE) deactivates the automatic search.
–
A reasonable value would be 10 seconds.
8.
Click OK to copy the settings for the script.
9.
Click OK to copy the settings for the FI APL.
The configuration script for the FI APL is ready and the import mechanism is now functional.
•
If there is a configuration script for the FI APL already configured on the Xpressions server, import the configuration generated by WebCDC in the Xpr server by executing the following steps:
1.
Open the XPR monitor and log on with an administrator account.
2.
Select the FI APL settings in the XPR monitor's modules window.
The FI APL configuration dialog opens.
3.
Switch to the Protocols tab.
4.
Highlight the XprConfig.e script on the Protocols tab and click Properties.
5.
Set the Header pattern to *.xml.
6.
Make sure the Poll directory field is set to the directory in which FI APL will search for new configuration files.
7.
Specify in the Poll rate field the intervals in which the FI APL will search for new configuration files.
–
Setting 0 (INFINITE) deactivates the automatic search.
–
A reasonable value would be 10 seconds.
8.
Click OK to copy the settings for the script.
9.
Click OK to copy the settings for the FI APL.
The configuration script for the FI APL is ready and the import mechanism is now functional.
The FI APL import mechanism expects to find a configuration file called "ipapl.xml" to read in.
1.
Place the configuration files (mta.xml and ipapl.xml) to the directory you have selected in the Poll directory field.
Note: You have to put mta.xml first or together with ipapl.xml file in the configured folder.
2.
Wait at least for the time period you have set in Poll rated field for the script to import the configuration.
The site and tenant settings have now been imported in the XPR server.
For further information please refer to OpenScape Xpressions V7, Server Administration, Section 28.3 "Configuring Sites and Tenants via Import File".
WebCDC: How to Import Configuration Files, ID: 
 © <MM/YYYY> Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.