|
1.
|
On the PC to be used for the import, set up a TFTP server (e.g., 3CDaemon) to allow file transfers. Configure the TFTP server to the location where the mediatrix file that is generated by WebCDC is stored.
|
|
2.
|
On that same PC, use a Web Browser to connect to the default rescue IP-Address http://192.168.0.1/ of the Mediatrix.
|
|
3.
|
|
4.
|
|
5.
|
Enter the following information on the Mediatrix Configurations Script page:
|
|
–
|
Generic File Name = Filename of the Config script generated by WebCDC or "<mediatrix_name>.txt".
|
|
6.
|
Click on Submit & Execute Now to import the file.
|
|
b)
|
|
c)
|
Click on Activate unsecure certificate transfer through web browser (not recommended).
|
|
d)
|
Go to the last section on the page: Certificate Upload Through Web Browser.
|
|
e)
|
Click on Browse.
|
|
g)
|
Set "Type"= "Host".
|
|
h)
|
Click on Upload to upload the certificate.
|
|
i)
|
Verify that the certificate has been uploaded as a Host Certificate. If a Host Certificate is uploaded, then an entry should be created in the Host Certificates section on the Management > Certificates page. If instead an Other certificate is uploaded, then an entry should be created in the Other Certificates section on the Management > Certificates page.
|
|
5.
|
At that point, the Mediatrix gateway should be ready for TLS registration with the OSV.
|